What Makes a Fully-Featured Cabinet Table?

If you fancy taking on a DIY building project how about making yourself a beautifully crafted item in your home workshop?

Having the right tools for the job, such as searching out one of the Best cabinet table saws around, will definitely help you to achieve a quality result and all you need to get started once you have the tools and materials is a blueprint to follow.

Here is a look at a typical assembly and an overview of the tools you might need.

Create a shopping list of materials

Preparation is often the key to success and it often pays to take your time creating a comprehensive checklist of everything you need from materials to tools. This list will be driven by the details of your project and your design blueprint will be your guide to all the items you will require to complete the project.

Calculate how much wood you will need and work out whether you have all the tools you need for the tasks ahead.

Pre-drilling is the way to go

Calculate the dimensions of the cabinet and cut down all of the wood you are using down to the required size with your table saw.

After you have done that you can use a pocket hole jig in order to pre-drill all the pocket holes required to complete the assembly process. It is well worth taking this route when you are building an item such as a cabinet as having the holes pre-drilled will make assembly much easier. You might find cutting and drilling easier if you use spring clamps to hold the wood in place while you are drilling and starting to put panels together.

Making drawers

Calculating the right size of your drawers can be a bit of a challenge but there is a way to work out the dimensions of your drawers so that they fit nicely. Start by measuring the width of the opening and then subtract the amount of thickness of the drawer slides you be using. For example, if the opening is 35 inches and the drawers slides are 1 inch thick your drawers should be 34 inches wide.

Start at the bottom

When you are attached drawer faces it can often work out easier to complete the task if you start with the bottom one so that you are able to line up the table with the cabinet more accurately. You may find this task becomes more straightforward if you clamp the face to the drawer box and subsequently secure the face to the drawers using appropriate wood screws.

Completing the job

Once you have meticulously finished the task of building the drawers and fronts and making sure they all fit snugly one of the final parts of the build process is to attach the tabletop.

As this is one of the final parts of the construction process you will want to ensure that the job looks professional and brings everything together by lining up successfully. A good way of achieving this aim would be to line up the top so it is exactly where you want it and then secure from underneath using the pre-drilled holes you might right at the beginning.

Every project you undertake will require a slightly different approach but if you have all the right tools and prepare properly it should turn out well once the job is finished.